Headlights are the elements most exposed to external factors, UV radiation, chipping, salt and dirt from the road.To maintain their clarity and prevent tarnishing, they are increasingly protected with ADBL Protect Shield PPF film.Below you will find the complete application process step by step.
Headlight preparation
We start with a thorough cleaning of the surface, washing, drying and degreasing.Any dirt, pollen or film after chemicals can cause micro-blisters under the film.It is best to use ADBL Cleaner or isopropyl alcohol (IPA) to get a perfectly smooth surface.Medium preparation and film positioning
We apply ADBL PPF Gel to the reflector, which allows the film to be positioned freely and extends the working time.After removing the liner, we place the film on the reflector and adjust it to the shape of the element, controlling the tension of the material.
Application on curves
Headlights have non-standard bends, so it’s crucial to maintain proper film tension.We work from the center to the edges, gently heating the material with a heat gun so that it retains its elasticity.ADBL Protect Shield PPF has a structure that allows you to stretch and maintain high transparency at the same time.Edge raking and closing
We rake slowly, moving radially from the center of the headlight until the gel and air are fully pushed out.Press the edges of the foil with a squeegee with felt or microfiber, and then heat it with a heat gun.This ensures that the adhesive is permanently bonded and eliminates the risk of peeling off after a few days.
